Universidade do Minho

 

Research Centre for Industrial and Technology Management
 
 
 
 
 
 
 
 


RESEARCH CENTRE FOR INDUSTRIAL AND TECHNOLOGY MANAGEMENT PUBLICATIONS

Detailed output CGIT 2011


Papers in International Peer Reviewed Journals (published)

[1] Bartolomeu Fernandes; Cunha, Jorge; Ferreira, Paula “The use of real options approach in energy sector investments” Renewable & Sustainable Energy Reviews 15(9) 4491-4497, 2011 (ISI Impact Factor 4.567).
http://www.sciencedirect.com/science/article/pii/S1364032111003479
[ISI Q1 – TOP 10%]

[2] Fernandes, N.O., Carmo-Silva, S.; Workload control under continuous order release; International Journal of Production Economics. Vol. 131 (2011) No. 1, pp. 257-262(WOS:000289393400029) http://www.sciencedirect.com/science/article/pii/S0925527310003646
[ISI Q1 – TOP 10%

[3] Ribeiro, Fernando; Ferreira, Paula; Araújo, M.M.T. “The inclusion of social aspects in power planning” Renewable & Sustainable Energy Reviews 15(9) 4361-4369, 2011.
http://www.sciencedirect.com/science/article/pii/S1364032111003613
[ISI Q1 TOP – 10%]

[4] Fernandes, N.O., Carmo-Silva, S.; Order release in a workload controlled flow shop with sequence-dependent setup times; International Journal of Production Research. Vol. 49 (2011), No. 8, pp.2443-2454 (WOS:000286879000015)
http://www.tandfonline.com/doi/full/10.1080/00207541003720376#.Uujnpfmp2Uk
[ISI Q2]

[5] Oliveira, R. F.; Teixeira, SFCF; Silva, L. F.; Teixeira, JCF and Antunes, H. Development of new spacer device geometry: a CFD study (Part I), Computer Methods in Biomechanics and Biomedical Engineering, April 2011.
DOI: http://dx.doi.org/10.1080/10255842.2011.563359
[ISI Q3 / SCIMAGO Q2]

[6] Rodrigues, J. d. S., Dinis-Carvalho, J., Lima, R. M. & Salgado, M. H. (2011). "Brazilian students and working capital: an analysis of their decisions when using virtual market business games." International Journal of Engineering Education.
(http://www.ijee.ie/latestissues/Vol27-3/22_ijee2433ns.pdf). (WOS:000291434000022) [ISI Q4 / SCIMAGO Q3]

[7] Arezes, PM, Colim, AS, Miguel, AS, Manual Materials Handling: knowledge and practices amongst Portuguese Health and Safety Practitioners, Work Journal of prevention assessment & rehabilitation, Vol. 39(2011), No. 4, pp 385-39.
[DOI: 10.3233/WOR-2011-1189] [IF=0,513] http://hdl.handle.net/1822/11832
[ISI Q4]

[8] Domingos Ribeiro; Fernando Braga; Sousa, R.D.; Carmo-Silva, Sílvio, An Application of the SMED Methodology in an Electric Power Controls Company, Romanian Review Precision Mechanics, Optics and Mechatronics, 40(40), 115-122, 2011.
http://www.incdmtm.ro/editura/revista/index.php?pag=show_articol&id_articol=371&lang=en
[SCIMAGO Q4]

[9] Fernandes, Nuno; Carmo-Silva, Sílvio, How to release orders in assembly job shops, Romanian Review Precision Mechanics, Optics and Mechatronics, 40, 44-48, 2011.
http://www.incdmtm.ro/editura/revista/index.php?pag=show_articol&id_articol=362&lang=en
[SCIMAGO Q4]

[10] Arezes, PM, Bizarro, M, Alcohol Consumption and Risk Perception in the Portuguese Construction Industry, The Occupational Health and Safety Journal
http://hdl.handle.net/1822/11829

[11] Cruz-Cunha, M. M. (2011) Um Referencial para o Alinhamento entre Intervenientes na Universidade Ágil e Virtual, IEEE Revista Iberoamericana de Tecnologías del Aprendizaje, 6(3) 103-110, 2011.

[12] Cunha, J.; Paisana, A. (2011) “The Financing Constraints Hypothesis and Inventory Investment Decisions of Firms”, China-USA Business Review, 10(12): 929-941.
http://www.davidpublishing.org/show.html?2790

[13] Ferreira, Leandro; Filipa Vieira “A relevância das fontes de informação externas na capacidade inovadora de empresas de Gestão de Resíduos: Estudo de casos” IJIE – Iberoamerican Journal of Industrial Engineering 3(1) 16-33, 2011. http://hdl.handle.net/1822/14969

[14] Neto, H., Areosa, J., Arezes, PM (2011). Editorial. RICOT Journal, nº1, pp. i-ii, ISSN 2182-4096.
http://hdl.handle.net/1822/20116

[15] Neves, M; Arezes, P; Leão, CP; Teixeira, S, Thermal comfort of trekking boots – experimental and numerical studies, Research Journal of Textile and Apparel, The Hong Kong Polytechnic University
http://hdl.handle.net/1822/11745

[16] Putnik, G. D; Shah, Vaibhav; Castro, Helio; Cruz-Cunha, M. M. (2011) The functionality of remote controlling in ubiquitous manufacturing systems demonstrator for I*PROMS “efm” showcase, Tékhne - Polytechnical Studies Review, IX(15) 169-189, 2011
:: top ::



Chapters or Papers in Books


[
17] G. Campanella, Varela, Leonilde, R. A. Ribeiro. ‘A Model for B2B Selection’ edited by Bernard De Baets, János Fodor, Carlos Serodio, Pedro Couto, Pedro Melo-Pinto, Advances in Intelligent and Soft Computing, Volume 107, Springer-Verlag 2011, pp: 221-228, DOI: 10.1007/978-3-642-24001-0_21
http://link.springer.com/chapter/10.1007/978-3-642-24001-0_21#page-1
[ISI]

[18] Santos, Mónica; Tereso, Anabela “On the Multi-mode, Multi-skill Resource Constrained Project Scheduling Problem - A Software Application” Advances in Intelligent and Soft Computing, Springer, Warsaw 96 239-248, 2011, (ISBN: 978-3-642-24000-3) (ISI-Thomson referenced, Accession Number: WOS:000292618100021).
http://apps.webofknowledge.com/full_record.do?product=UA&search_mode =GeneralSearch&qid=1&SID=Z1ssq8cUd7TATt3n5Ez&page=1&doc=1
[ISI]

[19] Campanella, G., Ribeiro, R. A., Varela, Leonilde; “A Model for B2B Supplier Selection”(2011); Eurofuse 2011, Workshop on Fuzzy Methods for Knowledge-Based Systems, Editado por: Melo-Pinto, et al.; Vol. 107, Advances in Intelligent and Soft Computing, Springer, Warsaw, pp. 221-228. ISBN: 978-3-642-24000-3
http://oa.uninova.pt/5116/     or
http://www.researchgate.net/publication/215583806_A_Model_for_B2B_Supplier_Selection
[SCIMAGO]

[20] Arezes, P. M. (2011). Physical risk factors in occupational environments. Loss Prevention and Safety – A practical risk management handbook, Chalmers University of Technology, Gotemburgo 1 1-17, 2011, (ISBN: 978-91-633-9250-4)
http://hdl.handle.net/1822/20096

[21] Cruz-Cunha, M. M., Putnik, G. D. & Varajão, J. E. (2011). The Use of Customer Relationship Management Software in Meta-Enterprises for Virtual Enterprise Integration. In Colomo-Palacios, R., Varajão, J. & Soto-Acosta, P. (Eds.). Customer Relationship Management and the Social and Semantic Web (pp. 312-326). Hershey, PA: Business Science Reference.

[22] Fernandes, S., Flores, M. A., & Lima, R. M. (2011). A Avaliação dos Alunos no Contexto de um Projeto Interdisciplinar. In L. C. d. Campos, E. A. T. Dirani & A. L. Manrique (Eds.), Educação em Engenharia: Novas Abordagens (pp. 219-280). São Paulo, Brasil: EDUC – Editora da PUC-SP.
http://repositorium.sdum.uminho.pt/handle/1822/18883.

[23] Lima, R. M., Carvalho, D., Sousa, R. M., Alves, A., Moreira, F., Mesquita, D., et al. (2011). Estrutura de Gestão para Planejamento e Execução de Projetos Interdisciplinares de Aprendizagem em Engenharia. In L. C. d. Campos, E. A. T. Dirani & A. L. Manrique (Eds.), Educação em Engenharia: Novas Abordagens (pp. 87-121). São Paulo, Brasil: EDUC – Editora da PUC-SP.
http://repositorium.sdum.uminho.pt/handle/1822/18878

[24] Rodrigues, J. d. S., Sauaia, A. C. A., Simões, A. d. S., Pinho, A. F. d., Alves, A., Molina, C. E. C., et al. (2011). Ensino e aprendizagem vivencial em Engenharia: Simuladores, jogos, projetos interdisciplinares e ambientes de aprendizagem a distância (in portuguese). In V. F. d. Oliveira, V. Cavenaghi & F. S. Másculo (Eds.), Tópicos Emergentes e Desafios Metodológicos em Engenharia de Produção: Casos, Experiências e Proposições (pp. 250-320). Rio de Janeiro: ABEPRO – Associação Brasileira de Engenharia de Produção.
http://repositorium.sdum.uminho.pt/handle/1822/15356

[25] Santos, Mónica; Tereso, Anabela “On the Multi-mode, Multi-skill Resource Constrained Project Scheduling Problem - A Software Application” Advances in Intelligent and Soft Computing, Springer, Warsaw 96 239-248, 2011, (ISBN: 978-3-642-24000-3).
:: top ::



Books (authors, Editors, Editors of Proceedings International Conferences)


[26] Cruz-Cunha, M. M. & Varajão, J. E. (Eds.). (2011). Innovations in SMEs and Conducting E-Business: Technologies, Trends and Solutions. Hershey, PA: Business Science Reference. (18 capítulos)
http://www.igi-global.com/book/innovations-smes-conducting-business/49574
[ISI]

[27] Araújo, M., et.al. (2011). ICOPEV’2011 International Conference proceedings, (ISBN:)

[28] Arezes, P.; Barroso, Mónica; Carneiro, P.; Cordeiro, P.; Costa, N.; Baptista, José; Melo, R.; Miguel, A.S.; Perestrelo, G. P. (2011). SHO2011 : Colóquio Internacional de Segurança e Higiene Ocupacionais. Sociedade Portuguesa de Segurança e Higiene Ocupacionais, (ISBN: 978-972-99504-7-6), 978 p., 2011.
http://hdl.handle.net/1822/11746

[29] Arezes, PM, Azevedo, R, Barroso, MP et al. (2011). Caracterização do ambiente ocupacional de empresas do sector têxtil e do vestuário. Série Estudos Segurança e Saúde no Trabalho - 25, Autoridade para as Condições de Trabalho (ACT): Lisboa, 123 pgs., ISBN 978-989-8076-65-6.
http://hdl.handle.net/1822/20089

[30] Arezes, PM, Azevedo, R, Barroso, MP, Costa, JT, Costa, LG, Lopes, F, Miguel, AS, Vasconcelos, MT (2011). Estudo epidemiológico transversal em empresas têxteis de fiação, tecelagem e acabamentos. Série Estudos Segurança e Saúde no Trabalho - 26, Autoridade para as Condições de Trabalho (ACT), Ministério da Economia e do Emprego: Lisboa, 33 páginas, ISBN 978-989-8076-66-
http://hdl.handle.net/1822/20088

[31] Arezes, PM, Braga, C, Centeno, C., et al. (2011). Exposição ocupacional a ruído e vibrações na construção civil. Série Estudos Segurança e Saúde no Trabalho - 24, Autoridade para as Condições de Trabalho (ACT): Lisboa, 75 pgs., ISBN 978-989-8076-62-5.
http://hdl.handle.net/1822/20083

[32] Cruz-Cunha, M. M. & Moreira, F. J. (Eds.). (2011). Handbook of Research on Mobility and Computing: Evolving Technologies and Ubiquitous Impacts. Hershey, PA: Information Science Publishing. (77 chapters).

[33] Cruz-Cunha, M. M., Carvalho, V. C. & Tavares, P. C. (Eds.). (2011). Computer Games as Educational and Management Tools: Uses and Approaches. Hershey, PA: IGI-Reference. (17 chapters).

[34] Cruz-Cunha, M. M., Carvalho, V. H. & Tavares, P. C. (Eds.). (2011). Business, Technological, and Social Dimensions of Computer Games: Multidisciplinary Developments. Hershey, PA: IGI Reference. (19 chapters).

[35] Cruz-Cunha, M. M., Varajão, J., Powell, J. & Martinho, R. (Eds.) (2011) ENTERprise Information Systems, Proceedings: CENTERIS 2011 (Part I, II and III). Springer.

[36] Cruz-Cunha, M. M.; Gonçalves, P. S. T. R.; Lopes, Nuno; Miranda, Eva Maria; Putnik, G. D. (Eds) (2011) Handbook of Research on Business Social Networking: Organizational, Managerial, and Technological Dimensions, IGI Global. (ISBN: 9781613501689), USA, 2011.

[37] Hattum-Janssen, N. v., Lima, R. M., & Carvalho, D. (Eds.). (2011). Proceedings of the Third International Symposium on Project Approaches in Engineering Education (PAEE'2011): Aligning Engineering Education with Engineering Challenges. Lisbon - Portugal: Research Centre in Education (CiEd) of the University of Minho and Department of Production and Systems of School of Engineering of University of Minho.
http://paee.dps.uminho.pt/past-events/PAEE2011/PAEE2011proceedings.pdf

[38] Lima, R. M., Sampaio, P., Marques, A., Nunes, M. L., Alvelos, F., Mesquita, D., et al. (Eds.). (2011). Livro de Actas do Encontro Nacional de Engenharia e Gestão Industrial 2011 (ENEGI 2011). Guimarães - Portugal: Department of Production and Systems of School of Engineering of University of Minho.
http://repositorium.sdum.uminho.pt/handle/1822/15362,
http://hdl.handle.net/1822/15362

[39] Neto, H.; Areosa, J.; Arezes, P. M. (2011). RICOT 2011 Congress Proceedings. RICOT, (ISBN: 978-972-97763-2-8 ), Porto, 2011.

[40] Putnik, G. D; Paulo Ávila (Eds) (2011) Business sustainability 2.0, Escola Engenharia Universidade Minho, Instituto Superior Engenharia do Porto, (ISBN: ISBN 978-972-8692-66-7, ISBN 978-989-95907-3-1), Guimarães; Porto, 2011.
:: top ::



Papers in Proceedings of International Peer Reviewed Conferences


[41] Ferreira, Ana; Nunes, Manuel; Teixeira, S.F.C.F.; Leão, Celina P.; Teixeira, J.C.F.; Martins, Luís; Francisco Marques; Silva, A. M. E., Optimization of a small-scale cogeneration system as a function of the thermal demand, 4th International Congress on Energy and Environment Engineering and Management, Mérida , p. 1-8, 2011, (ISBN: 978-84-9978-014-6) 2011
http://hdl.handle.net/1822/15385
http://www.scopus.com/record/display.url?eid=2-s2.0-84869200459&origin=inward&txGid=F336CE43120FAD43E5B7BFD4ACDD546A.kqQe
WtawXauCyC8ghhRGJg%3a1

[ISI]

[42] Rodrigues, M. A., Arezes, P. Leão, C. P., Risk Acceptance Criteria Formulation in Furniture Industry: The Portuguese Reality, in Proceeding of the ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE2011, November 11-17, 2011, Denver Colorado, USA, #IMECE2011-63130, 9 pages (DVD)
http://dx.doi.org/10.1115/IMECE2011-63130
[ISI]

[43] Shahriari, L. Edman, K. Hamdani, P. M. Arezes (2011). Management Process Quality and Safety at Organizational Level. A case study at an international airpoty. Proceeding of the 2011 IEEE IEEM Conference, ISBN_ 978-1-4577-0738-4, pp.959-963.
http://dx.doi.org/10.1109/IEEM.2011.6118058
[ISI]

[44] Silva, Helder; Oliveira, José A.; Tereso, Anabela “A genetic algorithm for project scheduling in activity networks under resource complementarity” 17th European Concurrent Engineering Conference, London , p. 95-99, 2011, (ISBN: 978-90-77381-61-8)
[http://hdl.handle.net/1822/15524]
[ISI]

[45] Afonso, Paulo; Carla Duarte “Cost Analysis for Economic Evaluation of Health Care Services” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 117-125, 2011, (ISBN: 978-989-97050-1-2)
http://sieeum.eng.uminho.pt/getfile.aspx?source=db&fileid=54f9b107-
87ff-46ee-899e-82f914bccf08


[46] Afonso, Paulo; Telhada J.; Oliveira, J. “An Activity-Based Costing Model for Strategic Decisions in Transportation on Demand Projects” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães 1/1, p. 127-134, 2011, (ISBN: 978-989-97050 -1-2)
http://sieeum.eng.uminho.pt/getfile.aspx?source=db&fileid=f763292a-2034-4999-ac37-79acbdb4e88b

[47] Almeida, N., Carrer, C., Dinis-Carvalho, J. and Lima, R.M. (2011) 'Project Management Guide for Student Project Teams', In: Hattum-Janssen, N.V., Lima, R.M. & Carvalho, D., ed.^eds. Second Ibero-American Symposium on Project Approaches in Engineering
Education (PAEE’2011), Lisbon - Portugal.
http://paee.dps.uminho.pt/past-events/PAEE2011/PAEE2011proceedings.pdf

[48] Alves, A. C. (2011) "Hands-on simulation in the classroom to teach new concepts and to prepare future industrial engineers as operator´s instructors" Proceedings of International Symposium in Project Approaches in Engineering Education (PAEE2011), 1-2 October, Lisbon

[49] Alves, A. C., Carvalho, J. D. & Sousa, R. M. (2011) "Lean Production promotes thinkers, not "androids"", Proceedings of Business Sustainability, 22-24June, Ofir
http://hdl.handle.net/1822/19103

[50] Alves, A. C.; Carvalho, D.; Sousa, R.; Moreira, F. & Lima, R. (2011) “Benefits of Lean Management: results from some industrial cases in Portugal”, Proceedings do 6º Congresso Luso-Moçambicano de Engenharia (CLME2011), 29 Agosto-2 de Setembro, Maputo, Moçambique
http://repositorium.sdum.uminho.pt/handle/1822/18873
http://hdl.handle.net/1822/18873

[51] Amaral, António; Araújo, M.M.T.”Project Portfolio Selection and Monitoring – A Case Study” Internacional Conference on Project Economic Evaluation, Guimarães , p. 59-67, 2011, (ISBN: 978-989-97050-1-2)

[52] Ana C.M. Ferreira; Teixeira, S.F.C.F.; Nunes, Manuel; Martins, Luís; Teixeira, José; Leão, Celina P.; Marques, F.,Optimização Numérica no Projecto de um Sistema de Cogeração de Pequena Escala, Encontro Nacional de Engenharia e Gestão Industrial – ENEGI2011, Guimarães , p. 1-6, 2011, (ISBN: 978-989-97050-2-9).
http://hdl.handle.net/1822/15374

[53] Arezes, P. M., O uso de protetores auditivos em meio ocupacional: oportunidades e desafios futuros, SEPRONE 2011, Campina Grande , 2011

[54] Arezes, P. M., Occupational Noise Exposure and Hearing Protection, Doctoral Programa Seminars, Gotemburgo , 2011

[55] Arezes, P. M., Research on Hearing Protection Devices, PhD program seminars@Universidad Politecnicca de Madrid, Madrid , 2011

[56] Arezes, P. M.; Bernardo, C.A.; Mateus, O., Occupational noise exposure measurement: searching for the best strategy, IX Occupational Risk Prevention Conference - ORP 2011, Santiago , 2011, (ISBN: 978 84 934256 9 2)

[57] Arezes, P. M.; Swuste, P., Post-Graduation Education on Occupational Health and Safety (OHS): Results from a Survey within European Countries, XIX World Congress on Safety and Health at Work – Building a Global Culture of Prevention for a Healthy and Safe Future, Istambul , 2011, (ISBN: 978-975-455-167-9)

[58] Arrais-Castro, A.; Maria Leonilde Rocha Varela; Carmo-Silva, Sílvio, Web-based Decision Support System for Orders Planning, International Symposium on Computational Intelligence for Engineering Systems - ISCIES 2011, Coimbra, Portugal, 16 - 18 November 2011, 2011.
http://link.springer.com/chapter/10.1007%2F978-94-007-4722-7_16#page-1

[59] Arrais-Castro, A.; Maria Leonilde Rocha Varela; Putnik, Goran. A Platform for Agile Virtual Enterprise Synthesis Proceedings of the First International Conference on Virtual and Network Organizations Emergent Technologies and Tools (ViNOrg'11) , p. 324-
334, 2011, (ISBN: Springer, CCIS)
http://link.springer.com/chapter/10.1007%2F978-3-642-31800-9_32#page-1

[60] Arrais-Castro, A.; Varela, L.; Putnik, Goran. Multi-site production network integration model BUSINESS SUSTAINABILITY 2.0 Management, Technology and Learning for Individuals, Organizations and Society in Turbulent Environments, Guimarães , p. 247-252, 2011, (ISBN: 978-972-8692-66-7)
http://link.springer.com/chapter/10.1007%2F978-3-642-32191-7_1#page-2

[61] Barbosa, M.; Loureiro, I. F.; Leão, Celina P.; Arezes, P. M., O cliente e sua percepção na Avaliação Ergonómica: um contributo na competitividade no sector comercial, Encontro Nacional de Engenharia e Gestão Industrial – ENEGI2011, Guimarães , p. 1-5, 2011, (ISBN: 978-989-97050-2-9)

[62] Bittencourt, W., Alves, A. C. & Arezes, P. (2011) "Revisão bibliográfica sobre a sinergia entre Lean Production e Ergonomia", Proceedings do 6º Congresso Luso-Moçambicano de Engenharia (CLME2011), 29 Agosto-2 de Setembro, Maputo, Moçambique

[63] Campanella, G.; Ribeiro, R. A.; Varela, L. A Model for B2B Supplier Selection Advances in Intelligent and Soft Computing, Springer, Warsaw 107 221-228, 2011, (ISBN: 978-3-642-24000-3)

[64] Carlos A. Costa, António Monteiro, Ricardo Gonçalves, João Mendonça da Silva “Seamless information integration in network enterprises using MENTOR: development of a reference ontology in metrological domain” ViNOrg '11, First International Conference on Virtual and Networked Organizations, Emergent Technologies and Tools July 6-8, 2011, Ofir, Portugal

[65] Carmo-Silva, Sílvio; Maria Leonilde Rocha Varela, An Ontology for Production Systems Environments of Scheduling Problems, Business Sustainability 2.0 Management, Technology and Learning for Individuals, Organizations and Society in Turbulent Environments, Guimarães, Portugal, Dec, 2011, 50-56, 2011. (ISBN: 978-972-8692-66-7) http://labve.dps.uminho.pt/bs11/documentos/Program_BS11(final).pdf

[66] Carneiro, P.; Barroso, Mónica; Braga, Ana, Musculoskeletal Disorders in Providing Healthcare at Patients’ Home: risk assessment and construction of statistical models for forecasting, Semana da Escola de Engenharia, Guimarães , p. 1-2, 2011, (ISBN: 978-972-8692- 59-9)

[67] Carneiro, P.; Braga, Ana; Barroso, Mónica, Musculoskeletal complaints in nurses who provide home-based healthcare, International Conference on Healthcare Systems Ergonomics and Patient Safety - HEPS 2011, Oviedo , p. 273-275, 2011, (ISBN: 978-0-415-68413-2)
http://hdl.handle.net/1822/20450

[68] Carvalho, R., Alves, A. C. and Lopes, I. (2011) “Application of principles and practices of Lean Manufacturing in metal mechanics company”, World Conference in Engineering, The 2011 International Conference of Manufacturing Engineering and Engineering Management, 5-6 July, London,

[69] Carvalho, V., Leão, C., Soares, F. & Cruz-Cunha, M. M. (2011). Games Development for Pedagogical and Educational Purposes. In Cruz-Cunha, M. M., Carvalho, V. C. & Tavares, P. (Eds.). Computer Games as Educational and Management Tools: Uses and Approaches. IGI-Reference.

[70] Castro A., Pires A., Costa L., Putnik G., Ávila P. (2011) RESOURCES SELECTION FOR AGILE/VIRTUAL ENTERPRISES: PART II – PROTOTYPE/DEMONSTRATOR TOOL. In Putnik G. D. & Ávila, P. (Eds.) Business Sustainability II (Proceedings of the Second International Conference on Business Sustainability, 2011, Póvoa de Varzim), Portugal.

[71] Castro, Helio. A review of agile and lean manufacturing as issues in selected international and national research and development programs Second International Conference on Business Sustainability 2011 - Management, Technology and Learning for
Individuals, Organisations and Society in Turbulent Markets (BS'11), Póvoa de Varzim , 2011, (ISBN: 978-989-95907-3-1)

[72] Cruz-Cunha, M. M., Putnik, G. D. & Varajão, J. E. (2011). The Use of Customer Relationship Management Software in Meta-Enterprises for Virtual Enterprise Integration. In Colomo-Palacios, R., Varajão, J. & Soto-Acosta, P. (Eds.). Customer Relationship Management and the Social and Semantic Web (pp. 312-326). Hershey, PA: Business Science Reference.

[73] Cruz-Cunha, M. M.. Motivations for CRM adoption in large companies in Portugal Second International Conference on Business Sustainability 2011 - Management, Technology and Learning for Individuals, Organisationsand Society in Turbulent Markets (BS'11), Póvoa de Varzim, 2011

[74] Cunha, Jorge; Ana Fernández Fernández; Enrique Ares Goméz “Social impact on project assessment: an integrated methodology for the assessment of investment projects in Research and Development (R&D) at a society level” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 293-298, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15379

[75] Cunha, Jorge; Ferreira, Paula; Araújo, M.M.T.; Enrique Arés Gomez “Social Return of R&D investments in Manufacturing Sector: Some Insights from an Exploratory Case Study” MESIC2011 - 4th Manufacturing Engineering Society International Conference, Cadiz , 2011 (ISBN 978-84-615-6973-1).
http://hdl.handle.net/1822/19566

[76] Cunha, Jorge; Paisana, António “Evidence on the investment-cash flow sensitivity for a panel of Portuguese manufacturing firms” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 195-203, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15563

[77] Domingues, José Pedro Teixeira; Sampaio, Paulo; Arezes, P., Integrated management systems : the vision from the perspective of the Occupational Health & Safety System, Occupational Safety and Hygiene - SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães , p. 240-245, 2011,
http://hdl.handle.net/1822/11821

[78] Domingues, José Pedro Teixeira; Sampaio, Paulo; Arezes, P., Management systems integration : a 3-dimensional organisational perspective, 12th International Symposium on Quality, Osijek , p. 31 -45, 2011,
http://hdl.handle.net/1822/11955

[79] Domingues, P. ; Sampaio, P.; Arezes, P. M., Integração de sistemas de gestão. dados preliminares do projecto para desenvolvimento de uma metodologia para avaliação do nível de maturidade e eficiência, II Encontro de Investigadores da Qualidade , 2011

[80] Domingues, P.; Sampaio, P.; Arezes, P. M., Benchmarking on behalf of management systems integration, 2nd International Conference on Business Sustainability, 2011 (BS'11), Póvoa de Varzim, 2011

[81] Domingues, P.; Sampaio, P.; Arezes, P. M., Management systems integration: should quality be redefined?, European Organization for Quality Congress , 2011

[82] Domingues, P.; Sampaio, P.; Arezes, P. M., Management systems integration: a Renaissance organizational Era, Semana da Escola de Engenharia 2011 , 2011

[83] Domingues, P.; Sampaio, Paulo; Arezes, P. M., Beyond audit definition: a framework proposal for integrated management systems, Institute of Industrial Engineers Annual Conference , 2011

[84] Domingues, P.; Sampaio, Paulo; Arezes, P. M., Integração de sistemas de gestão: dados preliminares no desenvolvimento de uma metodologia para avaliação do nível de maturidade, Encontro Nacional de Engenharia e Gestão Industrial, Guimarães , 2011, (ISBN: 978-989-97050-2-9)

[85] Domingues, P.; Sampaio, Paulo; Arezes, P. M., Integrated Management Systems: the vision from the perspective of the occupational health and safety system, Colóquio Internacional de Segurança e Higiene Ocupacionais, Guimarães , p. 240-245, 2011

[86] Domingues, P.; Sampaio, Paulo; Arezes, P. M., Management Systems Integration: a 3-dimensional organizational perspective, International Symposium on Quality , p. 31-45, 2011

[87] Fernandes, A.F.; Loureiro, I. F.; Leão, Celina P.; Arezes, P. M., A Percepção do Utente na Avaliação Ergonómica em Unidades de Saúde: um estudo de caso, Encontro Nacional de Engenharia e Gestão Industrial – ENEGI2011, Guimarães , p. 1-6, 2011, (ISBN: 978-989-97050-2-9)

[88] Fernandes, Bartolomeu; Cunha, Jorge; Ferreira, Paula “Evaluation of res projects for electricity generation” 6th Dubrovnik Conference on Sustainable Development of Energy Water and Environmental Systems, Dubrovnik , 2011
http://hdl.handle.net/1822/15606

[89] Fernandes, Bartolomeu; Cunha, Jorge; Ferreira, Paula “Real options theory in comparison to other project evaluation techniques.” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 187-193, 2011, (ISBN: 978-989-97050-1- 2)
http://hdl.handle.net/1822/15567

[90] Fernandes, N.O., Carmo-Silva S.; The Influence of Release Frequency on Job Shop Logistic Performance; Proceedings of the ECEC 2011 - 18th Annual European Concurrent Engineering Conference, April 2011 London, UK

[91] Fernandes, N.O., Carmo-Silva S.; Workload Control Methods Stability, 25th European Simulation and Modelling Conference-ESM'2011 in Guimarães

[92] Ferreira, Ana C.M.; Teixeira, S.F.C.F.; Nunes, Manuel; Martins, Luís; Teixeira, José; Leão, Celina P.; Marques, F. “Optimização Numérica no Projecto de um Sistema de Cogeração de Pequena Escala” Encontro Nacional de Engenharia e Gestão Industrial – ENEGI2011, Guimarães , p. 1-6, 2011, (ISBN: 978-989-97050-2-9)
http://hdl.handle.net/1822/15374

[93] Ferreira, Ana; Nunes, Manuel; Teixeira, S.F.C.F.; Leão, Celina P.; Teixeira, J.C.F.; Martins, Luís; Francisco Marques; Silva, A. M. E. “Optimization of a small-scale cogeneration system as a function of the thermal demand” 4th International Congress on Energy and Environment Engineering and Management, Mérida , p. 1-8, 2011, (ISBN: 978-84-9978-014-6)
http://hdl.handle.net/1822/15388

[94] Ferreira, Ana; Nunes, Manuel; Teixeira, S.F.C.F.; Leão, Celina P.; Teixeira, J.C.F.; Martins, Luís; Silva, A. M. E. “An economic perspective on small-scale cogeneration systems optimization” 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Novi Sad , p. 2665-2675, 2011, (ISBN: 978-86-6055-016-5)
http://hdl.handle.net/1822/15392

[95] Ferreira, Ana; Nunes, Manuel; Teixeira, S.F.C.F.; Leão, Celina P.; Teixeira, J.C.F.; Martins, Luís; Silva, A. M. E., An economic perspective on small-scale cogeneration systems optimisation, 24th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, Novi Sad , p. 2665-2675, 2011, (ISBN: 978-86-6055-016-5)

[96] Ferreira, Ana; Nunes, Manuel; Teixeira, S.F.C.F.; Martins, Luís; Teixeira, J.C.F.; Francisco Marques; Leão, Celina P. “Optimal Design of Micro-Turbine Cogeneration Systems for the Portuguese Buildings Sector” ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE2011 , p. 1-8, 2011

[97] Ferreira, Ana; Nunes, Manuel; Teixeira, S.F.C.F.; Martins, Luís; Teixeira, J.C.F.; Francisco Marques; Leão, Celina P., Optimal Design of Micro-Turbine Cogeneration Systems for the Portuguese Buildings Sector, ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE2011 , p. 1-8, 2011

[98] Ferreira, Ana; Teixeira, S.F.C.F.; Teixeira, J.C.F., Numerical study of local stenosis development at abdominal aorta bifurcations, 4º Congresso Nacional de Biomecânica, Coimbra L. Roseiro, M. Augusta et al. (Eds), p. 101-106, 2011

[99] Ferreira, Ângela; Neves, Maria; Rodrigues, Cristina; Teixeira, S.F.C.F., Os Consumidores e o Artesanato Têxtil: Estudo Exploratório das Atitudes e Percepções A XXI Jornadas Hispano-Lusas de Gestión Científica – Responsabilidad Social e Innovación en las Fases Recesivas del Ciclo, Córdoba CD-ROM, 2011, (ISBN: 978-84-693-9621-6)

[100] Ferreira, Paula; Cunha, Jorge “Sustainable Development and Energy Sector Regulatory Models” 6th Dubrovnik Conference on Sustainable Development of Energy Water and Environmental Systems, Dubrovnik , 2011
http://hdl.handle.net/1822/15607

[101] Filipa Vieira; Cordeiro, Ana “Análise das Barreiras à Inovação nas Pequenas e Médias Empresas: Estudo de Casos” Encontro Nacional de Engenharia e Gestão Industrial – ENEGI2011, Guimarães , p. 173-180, 2011, (ISBN: 978-989-97050-2-9)
http://hdl.handle.net/1822/15366

[102] Filipa Vieira; Cordeiro, Ana “Inovação: Fator-chave na competitividade das pequenas e médias empresas (PMEs). Uma panorâmica das barreiras à inovação em Portugal” International Conference on Engineering UBI2011 (ICEUBI2011), Covilhã , 2011
http://hdl.handle.net/1822/14968

[103] Filipa Vieira; Leandro Ferreira “Fontes de Informação como Determinantes da Capacidade Inovadora de Empresas de Gestão de Resíduos: Estudo de Casos” Encontro Nacional de Engenharia e Gestão Industrial – ENEGI2011, Guimarães , p. 155-163, 2011, (ISBN: 978-989-97050-2-9)
http://hdl.handle.net/1822/15363

[104] Filipa Vieira; Romero, Fernando; Dorotéa Bueno da Silva “Technological Extension Program Pilot Project Implemented in the Capital Goods Sector in São Paulo – Brazil: Promoting Technological Innovation” International Conference on Project Economic Evaluation (ICOPEV), Guimarães , p. 69-76, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15365

[105] Francisco Moreira, Diana Mesquita and Natascha Van Hattum-Janssen; The importance of the project theme in project-based learning: a study of student and teacher perceptions; in PAEE'2011 International Symposium on Project Approaches in Engineering
Education, Lisbon-Portugal, 2011.

[106] Freire, Luciana; Arezes, P.; Campos, José, A importância das avaliações qualitativas em sistemas e-learning, Occupational Safety and Hygiene - SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães , p. 274-278, 2011.
http://hdl.handle.net/1822/11823

[107] Gabriela Ramos; Afonso, Paulo; Arezes, P. M. ”Cost-Benefit Analysis in Occupational Health and Safety” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães 1/1, p. 251-258, 2011, (ISBN: 978-989-97050-1-2)

[108] Gabriela Ramos; Afonso, Paulo; Arezes, P. M., Cost-Benefit Analysis in Occupational Health and Safety, 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães 1/1, p. 251-258, 2011, (ISBN: 978-989-97050-1-2)
http://sieeum.eng.uminho.pt/getfile.aspx?source=db&fileid=74531cdc-0b0c-4528-8edc-ac814091f43f

[109] Gabriela Ramos; Arezes, P. M.; Afonso, Paulo “Externalidades em segurança ocupacional: a importância da análise custo/benefício” Colóquio Internacional de Segurança e Higiene Ocupacionais, Guimarães, p. 534-538, 2011
http://hdl.handle.net/1822/11827

[110] Gomes, J.P., Martins, P. and Lima, R.M. (2011) 'Generic Referencing: Methodology of parts characterization', International Conference on Operations and Engineering Management (ICEOM'2011), Brazil: ABEPRO.
http://repositorium.sdum.uminho.pt/handle/1822/15616

[111] Gonçalves, P.J.S. and Fernandes, N.O. A Semi-Automatic System for Posture Risk Assessment, EUROSIS - EUROMEDIA, Uk, Abril 2011

[112] Guimarães, I.; Franz, L.; Arezes, P. M., A case study about laptop using and ergonomic implications in a Brazilian university, IX Occupational Risk Prevention Conference - ORP 2011, Santiago , 2011, (ISBN: 978 84 934256 9 2)

[113] Guimarães, I.; Franz, L.; Arezes, P. M., Um estudo de caso sobre o uso de computador portátil e implicações ergonômicas em uma universidade brasileira, XVIII Simpósio de Engenharia de Produção, São Paulo , 2011

[114] Idrogo, Aurelia Altemira Acuña; Paladini, Edson Pacheco; Arezes, P.; Sousa, Sérgio, Sistema integrado de gestão – SIG : um modelo para as PMEs, SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães , p. 309-313, 2011.
http://hdl.handle.net/1822/11814

[115] J. Carlos Sá, J. Dinis-Carvalho, Rui M. Sousa; Waste Identification Diagrams; 6º Congresso Luso-Moçambicano de Engenharia (CLME'2011)
http://hdl.handle.net/1822/23930

[116] José Gonçalves; Ferreira, Paula; Afonso, Paulo “Policy and Legislation for a New Energy Paradigm: the Case of Portuguese Legal Framework for Microgeneration” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães 1/1, p. 157-164, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15368

[117] Kahlen, F.-J., Flumerfelt, S., Siribang-Manalang, A. B. & Alves, A. C. (2011) "Benefits of Lean Teaching" Proceedings of American Society of Mechanical Engineers (ASME) International Mechanical Engineering Congress & Exposition, 12-18 November, Denver.

[118] Lago, E.; Arezes, P. M.; Barkokebas Júnior, B., Assessment and propagation of noise generated by construction equipment, IX Occupational Risk Prevention Conference - ORP 2011, Santiago , 2011, (ISBN: 978 84 934256 9 2)

[119] Lemos, M.F.; Arezes, P. M., Plantas de emergência em edifícios públicos: um estudo preliminar sobre a percepção dos utilizadores, 2as Jornadas de Segurança Contra Incêndios Urbanos, Coimbra , p. 411-418, 2011, (ISBN: 978-972-96524-5-5)

[120] Lopes, A.M.; Arezes, P. M.; Gerges, S., A Comparison Between the Measured and Perceived Physical Properties of Earmuffs and its Relation with the Comfort, 18th International Congress on Sound and Vibration, Rio de Janeiro , 2011

[121] Lopes, Alba; Arezes, P.; Gerges, Samir, A comparison between hearing protector properties measured in laboratory and perceived by the users, Occupational Safety and Hygiene - SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães 334-338, p. 334-338, 2011.
http://hdl.handle.net/1822/11824

[122] Loureiro, I. F.; Leão, Celina P.; Arezes, P. M., Clients, Professional and Analyst Dimensions: Intra and Inter Relationships Analysis in the Decision-making, ENBIS-11 European Network for Business and Industrial Statistics, Coimbra , p. 1-6, 2011

[123] Loureiro, I. F.; Leão, Celina P.; Arezes, P. M., Ergonomic Tridimensional Analysis: Contribution to a Case Study in Retailing Sector, XIX World Congress on Safety and Health at Work, Istanbul , 2011

[124] Loureiro, I. F.; Leão, Celina P.; Arezes, P. M., ETdA: Emerging challenges to the ergonomics domains. A continuous sustainable and educational model, XIX World Congress on Safety and Health at Work, Istanbul , 2011

[125] Loureiro, I. F.; Leão, Celina P.; Arezes, P. M.; Lima Neto, E. A., What can a logistic regression model offer to a three-dimensional ergonomic study? SHO 2011, Guimarães, p. 339-343, 2011, (ISBN: 978-972-99504-7-6)

[126] Loureiro, I. F.; Leão, Celina P.; Arezes, P. M.; Lima Neto, E.A., Ergonomic intervention: Logistic regression and chi-square test analysis contributions, XVIII Jornadas de Classificação e Análise de Dados Universidade de Trás-os-Montes e Alto Douro (JOCLAD), Vila Real, p. 1-4, 2011

[127] Loureiro, Isabel F.; Leão, Celina Pinto; Arezes, P.; Neto, Eufrásio A. Lima, O que pode oferecer um modelo de regressão logística a um estudo ergonómico tridimensional?, Occupational Safety and Hygiene - SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães , p. 339-343, 2011,
http://hdl.handle.net/1822/11825

[128] Luis Ferreira; Enrique Arés Gomez; G. Peláez Lourido; Mariano Marcos; Araújo, M.M.T. “Analysis of the influence of the production sequence in an automobile assembly line, modeled as a network of closed-loops” MESIC2011 - 4th Manufacturing Engineering Society International Conference, Cadiz , 2011

[129] Machado, Gonçalo L.N., Monteiro, António A.C., “Robust Fluid Dispenser Device Development for Rapid Prototyping Equipment“, 21st Brazilian Congress of Mechanical Engineering; October 24-28, 2011, Natal, RN, Brazil

[130] Maia, L. C., Alves, A. C. & Leão, C. P. (2001) "Metodologias para implementar Lean Production: uma revisão critica de literatura"Proceedings do 6º Congresso Luso-Moçambicano de Engenharia (CLME2011), 29 Agosto-2 de Setembro, Maputo, Moçambique

[131] Maria Leonilde Rocha Varela; Barbosa, R.; Costa, S. P2P Web Service based System for Supporting Decision-making in Cellular Manufacturing Scheduling International Symposium on Computational Intelligence for Engineering Systems - ISCIES 2011, Coimbra, 2011
http://link.springer.com/chapter/10.1007%2F978-94-007-4722-7_15#page-1

[132] Maria Leonilde Rocha Varela; Barbosa, R.; Putnik, Goran. Experimental Platform for Collaborative Inter and Intra Cellular Fuzzy Scheduling in an Ubiquitous Manufacturing System Proceedings of the First International Conference on Virtual and Network Organizations Emergent Technologies and Tools (ViNOrg'11) , p. 227-236, 2011, (ISBN: Springer, CCIS)
http://link.springer.com/chapter/10.1007%2F978-3-642-31800-9_23#page-1

[133] Miguel, A.S., Plenária: Exposição profissional ao ruído, 11º Fórum Nacional de Medicina do Trabalho, Lisboa, 2011

[134] Miguel, A.S.; Arezes, P. M., Especialização em Engenharia de Segurança. Um contributo da Ordem para a Prevenção de Riscos, Seminário Prevenção de Riscos Profissionais - Preservar o Passado, Proteger o Futuro (Ordem dos Engenheiros), Lisboa, 2011

[135] Moraes, A. S. P.; Arezes, P. M.; Vasconcelos, R., Articulating Ergonomics and Engineering Design to Develop Healthy and Safe Work Environments, XXIIIrd Annual International Occupational Ergonomics and Safety Conference Baltimore, Maryland, USA?9-10 June 2011. International Society of Occupational Ergonomics and Safety, Baltimore , p. 179-183, 2011, (ISBN: 97809652558-8-2)

[136] Moraes, A.S.; Arezes, P. M.; Vasconcelos, R., Articulating Ergonomics and Engineering Design to Develop Healthy and Safe Work Environments., XIX World Congress on Safety and Health at Work – Building a Global Culture of Prevention for a Healthy and Safe Future, Istambul , 2011, (ISBN: 978-975-455-167-9)

[137] Natascha Van Hattum-Janssen, Adriana Fischer and Francisco Moreira; Presentation skills for engineers: Systematic interventions in a project-based learning course; in SEFI Annual International Conference - Global Engineering Recognition, Sustainability, Mobility, Lisbon-Portugal, 2011.

[138] Neves, Maria; Leão, Celina P.; Teixeira, S.F.C.F.; Arezes, P. M., Testes de conforto térmico aplicados a uma malha multifuncional desenvolvida com novos materiais, X Congresso Ibero-americano em Engenharia Mecânica – CIBEM10, Porto , 2011, (ISBN: 978-989-96276-2-8)

[139] Nunes, Manuel; Afonso, Paulo; Carlos Barbosa; Marta Gomes, Inter-firm cost management in high-tech product development projects in the plastics processing industry, 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 107-115, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15371
http://sieeum.eng.uminho.pt/getfile.aspx?source=db&fileid=e58f688b-0ef4-4734-980b-9b4adef17d87

[140] Nunes, Manuel; Carla Malheiro “A Importância do Design da Embalagem na Competitividade das Empresas Alimentares” Encontro Nacional de Engenharia e Gestão Industrial, Guimarães , p. 277-283, 2011, (ISBN: 978-989-97050-2-9)
http://hdl.handle.net/1822/15376

[141] Nunes, Manuel; Ferreira, Ana; Teixeira, S.F.C.F.; Martins, Luís “Development of a cost-benefit model for micro CHP systems” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 243-249, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15386

[142] Nunes, Manuel; Ferreira, Ana; Teixeira, S.F.C.F.; Martins, Luís, Development of a cost-benefit model for micro CHP systems, 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 243-249, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/14711

[143] Nunes, Manuel; Ferreira, Paula; Luís A. Rocha “Addressing sustainability: comprehensive frameworks for evaluating new product development” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 101-106, 2011, (ISBN: 978- 989-97050-1-2)
http://hdl.handle.net/1822/14711

[144] Nunes, Manuel; Filipa Castro “Integração de Práticas de Ecodesign no Processo de Desenvolvimento de Novos Produtos” Encontro Nacional de Engenharia e Gestão Industrial, Guimarães, p. 165-172, 2011, (ISBN: 978-989-97050-2-9)
http://hdl.handle.net/1822/15381

[145] Olalla Barreiro; Ferreira, Paula; Enrique Ares “A contribution to the analysis of the social return of R+D projects and support programmes” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 285-292, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15568

[146] Olalla Barreiro; Ferreira, Paula; Enrique Ares “Using expert interviews to create electricity scenarios and to assess social impacts. Using expert interviews to create electricity scenarios and to assess social impacts” 1st International Conference on Project
Economic Evaluation (ICOPEV'2011), Guimarães , p. 285-292, 2011, (ISBN: 978-989-97050-1-2)

[147] Oliveira, J.; Telhada J.; Ferreira, Paula “A cost-benefit analysis of an intelligence and demand-responsive public transport system for elderly and disabled” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15600

[148] Oliveira, R.; Teixeira, S.F.C.F.; Teixeira, José; Silva, Luís; Ana C.M. Ferreira, Spacer Design Optimization using CFD Software, ECCOMAS CFD & OPTIMIZATION Thematic Conference 2011-063, Antalya, 2011

[149] Oliveira, Romero Cardoso; Arezes, P.; Másculo, Francisco Soares, Análise da relação entre a execução de posturas forçadas e o aparecimento de dores nos membros superiores: estudo de caso numa indústria de calçado, Occupational Safety and Hygiene - SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães, p. 452-455, 2011,
http://hdl.handle.net/1822/11816

[150] Patricia Carneiro; Ferreira, Paula “The evaluation of biomass power projects” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 231-234, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15566

[151] Pereira, Sérgio; Ferreira, Paula; Vaz, A.I.F. “Optimization models to support sustainable electricity planning decisions” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 149-155, 2011, (ISBN: 978-989-97050-1- 2)
http://hdl.handle.net/1822/15564

[152] Pires A., Putnik G., Ávila P. (2011) RESOURCES SELECTION FOR AGILE/VIRTUAL ENTERPRISES: PART I – MODEL FOR VALUE ANALYSIS INTEGRATION. In Putnik G. D. & Ávila, P. (Eds.) Business Sustainability II (Proceedings of the Second International Conference on Business Sustainability, 2011, Póvoa de Varzim), Portugal.

[153] Putnik G. D. (2011) UBIQUITOUS MANUFACTURING SYSTEMS VS. UBIQUITOUS MANUFACTURING: TWO PARADIGMS. In Putnik G. D. & Cruz-Cunha M. M. (Eds.) Proceedings of the First International Conference on Virtual and Network Organizations Emergent Technologies and Tools - ViNOrg ’11, Springer

[154] Putnik G., Alves C., Castro H., Cruz-Cunha M. M. (2011) A RECONFIGURATION, OR INTEGRATION, TIME STRUCTURE MODEL FOR ELEMENTARY SEQUENTIAL SYSTEM ARCHITECTURE. In Putnik G. D. &Ávila, P. (Eds.) Business Sustainability II (Proceedings of the Second International Conference on Business Sustainability, 2011, Póvoa de Varzim), Portugal.

[155] Putnik, Goran; Ferreira, L.; Shah, V.; Putnik, Z.; Castro, H.; Cruz-Cunha, M. M.; Maria Leonilde Rocha Varela. Effective service dynamic packages for ubiquitous manufacturing system. Proceedings of the First International Conference on Virtual and Network Organizations Emergent Technologies and Tools (ViNOrg'11) , p. 213-226, 2011, (ISBN: Springer)
http://link.springer.com/chapter/10.1007%2F978-3-642-31800-9_22#page-1

[156] Ramos, Delfina Gabriela Garrido; Arezes, P.; Afonso, Paulo Sérgio Lima Pereira, Externalidades em segurança ocupacional: a importância da análise custo/benefício, Occupational Safety and Hygiene - SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães, p. 534-538, 2011,
http://hdl.handle.net/1822/11827

[157] Ribeiro, Fernando; Ferreira, Paula; Araújo, Madalena “A Methodology to Address Social Concerns on Electricity Planning” 6th Dubrovnik Conference on Sustainable Development of Energy Water and Environmental Systems, Dubrovnik , 2011
http://hdl.handle.net/1822/15602

[158] Ribeiro, Fernando; Ferreira, Paula; Araújo, Madalena “Using expert interviews to create electricity scenarios and to assess social impacts. Using expert interviews to create electricity scenarios and to assess social impacts” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 285-292, 2011, (ISBN: 978-989-97050-1-2)
http://hdl.handle.net/1822/15570

[159] Rocha, F.; Maria Leonilde Rocha Varela; Carmo-Silva, Sílvio, Product Documentation Management through REST-based Web Service, International Symposium on Computational Intelligence for Engineering Systems - ISCIES 2011, Coimbra, Portugal, 16 - 18 November 2011, 2011
http://link.springer.com/chapter/10.1007%2F978-94-007-4722-7_17#page-1

[160] Rocha, G., Alves, A. C. and Braga, F. (2011) “Implementação de um Sistema Pull numa Linha de Montagem de Componentes Electrónicos”, Proceedings do 6º Congresso Luso-Moçambicano de Engenharia (CLME2011), 29-2 de Setembro, Maputo, Moçambique

[161] Rodrigues, J.d.S., Pistori, D.S.d.S., Zambon, K.L., Scarelli, A., Lima, R.M. and Dinis-Carvalho, J. (Year) 'Model of a Game for Improving Integrated Decisions in Production Management', In: Putnik, G.D. & Cruz-Cunha, M.M., ed.^eds. Virtual and Networked Organizations, Emergent Technologies and Tools (ViNOrg’11), Ofir, Portugal.

[162] Rodrigues, M. A.; Arezes, P. M.; Leão, Celina P., Importance of risk acceptance criteria in the decision making process - a review, SHO 2011, Guimarães , p. 554-558, 2011, (ISBN: 978-972-99504-7-6)

[163] Rodrigues, M. A.; Arezes, P. M.; Leão, Celina P., Risk acceptance criteria formulation in furniture industry: the Portuguese reality, ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE2011 , p. 1-6, 2011

[164] Rodrigues, M. A.; Leão, Celina P.; Barroso, Mónica; Arezes, P. M., Supporting tool on the decision-making for the comfort conditions optimization, ENBIS-11 European Network for Business and Industrial Statistics, Coimbra , p. 1-7, 2011

[165] Rodrigues, M.; Arezes, P. M.; Leão, Celina P., Organizational and Personal Factors in Judging the Occupational Risk Acceptability, XIX World Congress on Safety and Health at Work – Building a Global Culture of Prevention for a Healthy and Safe Future, Istambul , 2011, (ISBN: 978-975-455-167-9)

[166] Rodrigues, Matilde Alexandra; Arezes, P.; Leão, Celina Pinto, Importance of risk acceptance criteria in the decision making process : a review, Occupational Safety and Hygiene - SHO 2011, Sociedade Portuguesa de Segurança e Higiene Ocupacionais (SPOSHO), Guimarães , p. 554-558, 2011,
http://hdl.handle.net/1822/11830

[167] Rodrigues, N.; Teixeira, S.F.C.F.; Miguel, A.S.; Teixeira, J.C.F.; Oliveira, R., Validação experimental de um modelo CFD na caracterização de um ambiente térmico ocupacional, 4º Congresso Nacional de Biomecânica, Coimbra, Portugal , 2011

[168] Rodrigues, N.; Teixeira, S.F.C.F.; Miguel, A.S.; Teixeira, J.C.F.; Oliveira, R., Thermal environment characterisation using a CFD model, Internationaler Kongress für Arbeitsschutz und Arbeitsmedizin (A+A 2011), Düsseldorf , 2011

[169] Rodrigues, N.; Teixeira, S.F.C.F.; Miguel, A.S.; Teixeira, J.C.F.; Oliveira, R., Ferramentas de CFD na avaliação do conforto térmico, ENEGI 2011 - Encontro Nacional de Engenharia e Gestão Industrial, Guimarães , 2011

[170] Romero, Fernando; António Rocha “Technology Evaluation and Licensing: a Literature Review and an Assessment of the Portuguese Universities Technology Transfer Practices” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , 2011, (ISBN: 978-989-97050-1-2)

[171] Sabioni, P.; Carneiro, V.; Maria Leonilde Rocha Varela. Food Service Management Web Platform based on XML Specification and Web Services International Symposium on Computational Intelligence for Engineering Systems - ISCIES 2011, Coimbra , 2011
http://link.springer.com/chapter/10.1007%2F978-94-007-4722-7_26#page-1

[172] Santos, Mónica; Tereso, Anabela “On The Multi-Mode, Multi-Skill Resource Constrained Project Scheduling Problem – Computational Results” 1st International Conference on Project Economic Evaluation (ICOPEV'2011), Guimarães , p. 93-99, 2011, (ISBN: 978-989-97050-1-2)
[http://hdl.handle.net/1822/15519]

[173] Shah V., Putnik G. D., Castro H. (2011) PROTOTYPE MULTIPLEX COMMUNICATION SYSTEM FOR REMOTE CONTROL OF MACHINE TOOLS. In Putnik G. D. & Cruz-Cunha M. M. (Eds.) Proceedings of the First International Conference on Virtual and Network Organizations Emergent Technologies and Tools - ViNOrg ’11, Springer

[174] Silva, Helder; Tereso, Anabela; Oliveira, José A. “Sequencing Activities in a Project Network with Resource Complementarity – Further Results” X Congreso Galego de Estatística e Investigación de Operacións, Pontevedra, 2011, (ISBN: 978-84-938642-2-4)
[http://hdl.handle.net/1822/15530]

[175] Soares, F.O.; Leão, Celina P.; Ana C.M. Ferreira; Costa, S., Engenharia no Feminino – Que desafios?, 6º Congresso Luso-Moçambicano de Engenharia (CLME2011), Maputo , p. 1-8, 2011, (ISBN: 978-972-8826-24-6)

[176] Sousa R., Pithon A., Stecklow P.; Redes colaborativas no contexto do paradigma de gestão lean; 6º Congresso Luso-Moçambicano de Engenharia (CLME'2011)

[177] Tavares, P., Teixeira, P., Pereira, L. & Cruz-Cunha, M. M. (2011). Video Games as aggregating mediums and resulting products of several visual communication languages. In Cruz-Cunha, M. M., Carvalho, V. C. & Tavares, P. (Eds.). Business, Technological and Social Dimension of Computer Games. IGI-Reference.

[178] Teixeira, S.F.C.F.; Oliveira, Ricardo; Rodrigues, Nelson; Miguel, A.S.; Teixeira, J.C.F., Experimental validation of a CFD model in a thermal environmental characterisation, ASME International Mechanical Engineering Congress & Exposition, Denver, 2011.
http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1642421

[179] Vieira, G. G.; Maria Leonilde Rocha Varela; Putnik, Goran. Technologies Integration for Distributed Manufacturing Scheduling in a Virtual Enterprise. Proceedings of the First International Conference on Virtual and Network Organizations Emergent Technologies and Tools (ViNOrg'11) , p. 345-355, 2011, (ISBN: Springer, CCIS)
http://link.springer.com/chapter/10.1007%2F978-3-642-31800-9_34#page-1

[180] Vieira, G. G.; Maria Leonilde Rocha Varela; Putnik, Goran. P2P Decision Support System for Cooperative Electrical Energy Distribution Network Management. Proceedings of the First International Conference on Virtual and Network Organizations Emergent Technologies and Tools (ViNOrg'11) , p. 237-247, 2011, (ISBN: Springer, CCIS) http://link.springer.com/chapter/10.1007/978-3-642-31800-9_24#page-1

[181] Vieira, G. G.; Maria Leonilde Rocha Varela; Ribeiro, R. A. Fuzzy Web Platform for Electrical Energy Losses Management. International Symposium on Computational Intelligence for Engineering Systems - ISCIES 2011, Coimbra , 2011
http://link.springer.com/chapter/10.1007%2F978-94-007-4722-7_18#page-1

[182] Wastony Bittencourt; Alves, Anabela; Arezes, P. M., Revisão bibliográfica sobre a sinergia entre Lean Production e Ergonomia, 6º Congresso Luso-Moçambicano de Engenharia (CLME2011), Maputo, 2011
:: top ::



PAPERS IN NATIONAL PEER REVIEWED JOURNALS AND BOOKS (published)

[183] Cruz-Cunha, M. M. & Varajão, J. (2011). Seleção de Sistemas CRM Utilizando AHP. Teoria e Prática em Administração, 1(1), 1-17.

[184] Maia, L., Alves, A. and Leão, C. (2011). “Implementar o modelo de produção Lean na ITV: Porquê e como?” Revista Nova Têxtil

[185] Rabbani, E., Jalali, S., Barkokébas Junior, B., Arezes, PM (2011). Segurança e Saúde do Trabalho no Contexto da Construção Sustentável. Revista Construir NE, nº 58, Agosto 2011, pp. 52-54, ISSN 1677- 8642
http://hdl.handle.net/1822/20115
:: top ::



Ph.D THESES CONCLUDED

[186] Sandra Raquel Fernandes; Tese de Doutoramento em Educação – Universidade do Minho; Título: A Aprendizagem Baseada em Projectos Interdisciplinares no Quadro do Processo de Bolonha – Avaliação do Impacto de uma Experiência na Licenciatura em Engenharia e Gestão Industrial da Universidade do Minho; Orientadores: Assunção Flores e Rui M. Lima; Data de início: Setembro de 2006; Data de Conclusão: 11 de Janeiro de 2011.
:: top ::



M.Sc. DISSERTATIONS CONCLUDED

[187] Alves, Catia (2011). Desenvolvimento de um modelo de tempo real em empresas virtuais. Master Thesis. University of Minho.

[188] Alberto Filipe Ferreira Granja, Criação de um modelo de serviços nas relações com stakeholders para novos modelos de negócios, 2011.

[189] André Filipe Nogueira da Silva, Desenvolvimento de um modelo de representação de competências para integração em empresas virtuais, 2011.

[190] Armando Manuel Clemente da Torre, Desenvolvimento de um serviço de brokering para apoio ao outsourcing, 2011.

[191] Gaspar Gonçalves Vieira, Desenvolvimento de um Sistema de Apoio à Gestão de uma Rede de Distribuição de Energia Eléctrica, 2011.

[192] Humberto Nuno Teixeira, Uma metodologia de diagnóstico de problemas da qualidade em pequenas e médias empresas, Mestrado em Engenharia Industrial, 2011.

[193] José Paulo Carneiro Melo Mamede, Estudo de Métodos e Sistemas de Escalonamento da Produção, 2011.

[194] Amarria Dila, Usability analysis in a multimedia application for Manual Material Handling risk assessment, 11-12-2011

[195] Ana Filipa Fernandes, Modelo Tridimensional de Apoio à Avaliação Ergonómica em Unidades de Saúde, 10-12-2011

[196] Ana Silvia Sampaio Pombeiro, Rotatividade de Tarefas na prevenção das Lesões Músculo-Esqueléticas relacionadas com o Trabalho, 10-12-2011

[197] António Francisco Trancoso Mendes, Ruído ocupacional em ambiente industrial, 09-09-2011

[198] Eduardo Luís Sapeta Barradas, Estudo da exposição ocupacional ao ruído em estações de tratamento de águas e sua avaliação audiométrica, 15-11-2011

[199] Ermelinda Manuela Teixeira Pinheiro, Organização da Emergência. Risco de incêndio nos cuidados de saúde primaries, 14-10-2011

[200] José António Faria de Araújo, Análise de acidentes de trabalho do tipo quedas em altura na indústria da construção. 10-10-2011

[201] Júlio João Lopes da Cunha, Optimização de um MOTOR DI-SI usando CFD, 13-12-2011

[202] Leonildo Santos do Nascimento Júnior, Aspectos ergonómicos no uso de utensílios domésticos por populações idosas: um estudo exploratório, 10-12-2011

[203] Liliana Gouveia da Silva Gomes, Safety Knowledge amongst 3B´s Research Group: basis for implementing preventive and corrective measures when conducting experimental work 10-12-2011

[204] Nelson José Oliveira Rodrigues, Caracterização do ambiente térmico ocupacional de salas de operação – construção de um modelo CFD, 12-12-2011

[205] Ricardo Jorge Capitão da Silva, Análise e investigação de acidentes de trabalho. 08-11-2011

[206] Zita Marina Fernandes Freitas, Avaliação do impacto da legislação REACH num laboratório de controlo da qualidade da água. 15-11-2011
:: top ::


INTERNATIONAL CONFERENCES ORGANIZATION

[207] Hattum-Janssen, N. v., Lima, R. M., Carvalho, D. (Eds.). (2011). Proceedings of the Third International Symposium on Project Approaches in Engineering Education (PAEE'2011). Lisbon, Portugal: Research Centre in Education (CiEd) of the University of Minho, Department of Production and Systems of School of Engineering of University of Minho. CGIT: Rui M. Lima, Dinis Carvalho, Rui M. Sousa, Anabela Alves, Francisco Moreira

[208] Encontro Nacional de Engenharia e Gestão Industrial (ENEGI2011), Guimarães, Portugal, 27 e 28 de Maio de 2011. http://enegi2011.dps.uminho.pt/. CGIT: Rui M. Lima, Lopes Nunes

[209] 6º Congresso Luso-Moçambicano de Engenharia (CLME2011). Maputo, Moçambique. 29 de Agosto a 2 de Setembro de 2011. Comissão de Organização. CGIT: Anabela Alves, Rui M. Sousa, Dinis Carvalho, Rui M. Lima

[210] Simpósio “Gestão de Projetos de Engenharia” – 6º Congresso Luso-Moçambicano em Engenharia. Maputo, Moçambique. 29 de Agosto a 2 de Setembro de 2011. Organizadores: Rui M. Lima e André Luiz Aquere. CGIT: Rui M. Lima

[211] Simpósio “Lean Management” no 6º Congresso Luso-Moçambicano de Engenharia (CLME2011). Maputo, Moçambique. 29 de Agosto a 2 de Setembro de 2011. Organizadores: Anabela Alves, Rui M. Sousa, Dinis Carvalho, Franz Joseph Kahlen. CGIT: Anabela Alves, Rui M. Sousa, Dinis Carvalho.

[212] ICOPEV‘2011 – 1st International Conference on Project Economic Evaluation, Guimarães (Portugal). Organizadores CGIT: Araújo, M., Ferreira, P., Nunes, M.J.L., Cunha, J., Afonso, P., Tereso, A., Dionísio, F., Paisana, A., Romero, F.

[213] International Symposium on Occupational Safety and Hygiene – SHO 2012, Guimarães, 10th and 11th February 2011. Organizadores CGIT; Pedro Arezes, S. Miguel, et al.

[214] 1st Working Conditions International Congress (CICOT), Arts Faculty of University of Porto, 16 September 2011, Porto. Organizadores CGIT; Pedro Arezes, S. Miguel, et al.
:: top ::


MODELS

[215] Martins, Paulo, GenPPC - Configurable production planning and control information system based on generic referencing for high diversity and mass customization

[216] Fernandes, N. O., A simulation Model for studying order release under sequence-dependent setup times

[217] Fernandes, N. O., A simulation Model for studying production control under continuous order release and controlled workload.
:: top ::


SOFTWARE - COMPUTACIONAL APPLICATIONS

[218] Martins, Paulo, Generic Product Data Model

[219] Fernandes, N. O., A Arena® simulation model software for studying order release under sequence-dependent setup time

[220] Fernandes, N. O., A Arena® simulation model software for studying production control under continuous order release and controlled workload
:: top ::


 
  © 2014 Centro de Gestão Industrial e da Tecnologia | Depto. Produção e Sistemas